Fix Disabled Hidden Attribute Checkbox

Download iReset dan run software. Bereh.

Updating CCcam Server

Menu > ok
Network Local Setting > ok
CCcam Client Setup > ok
Manage Config Files > ok
CCcam.cfg > ok
Add > (blue button)
Protocol : CCcam
Host : tv3.kongsi.asia
Port : 8073
User : (Call your introducer)
Pwd : (Call your introducer)
Active > (green button)
Exit > sampai habis
Restart Device anda....

Make a bootable disk

Open An Elevated Command Prompt

Click Start -> All Programs -> Accessories and right-click on Command Prompt. Select Run As Administrator. Of course, you need to be able to authenticate as the administrator on the PC you’re using.

Partitioning The Disk

Type:

DISKPART

This will open up the partitioning application. Next, type:

LIST DISK

Figure out which of the drives listed is your USB drive, and note the number. It’s crucial you get this right, or you’re going to end up losing data on other drives.

Next, type the following series of commands, but replace the DISK number in the first line with the appropriate number from the above list. Here, my disk is number 1. Don’t confuse this with PARTITION 1. That number should not change, even if your disk is 3.

SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
ASSIGN
EXIT

Make It Bootable!

The format step may take a little while (it actually took about 30 minutes on my machine). When you’re done, put in your installation DVD if you haven’t already. Note down which drive letter your USB disk and Windows installation DVD are located at.

Go back to your command prompt and type – assuming D: is your DVD drive with the install DVD, and U: is your USB drive:

D:/BOOT/BOOTSECT.EXE /NT60 U:

This will basically make your USB drive bootable.

Copy Everything

The final step can be done from My Computer. Just open up the installation DVD, highlight everything, and drag it over to your USB drive.

This will also take a while.

Now you should be all set – just insert the USB disk into your new PC, and enter the BIOS to adjust the boot order, or choose the option during start up which says Choose Boot Device.

How To Block Internet Download Manager Automatic Updates

There is a much more effective way of stopping the update checks, you will need to open up regedit (there isno need to run as administrator) and go to the following key:

1	HKEY_CURRENT_USER\Software\DownloadManager

and then change the “LastCheck” and/or “LastTry” value to something like e.g.:

1	[10/22/15]

Then restart your computer and you will no longer be nagged!

I have always hated how Internet Download Managers developers have forced the “automatic update” us all of its users.

As well as sending sensitive (serial / license checking) data back to their servers, it also nags you to update!

If you want to put an end to this invasion of privacy, all you need to do it is simply add the following to your host file:

174.133.70.198 localhost
174.133.70.98 localhost
star.tonec.com localhost

You can edit your host file you a utility such as BarevTM Host File Editor

Or you can setup your firewall to block this IP on ALL ports: 174.133.70.198 AND 174.133.70.98 AND this Host: star.tonec.com

Redirect Portal

/var/www/html/index.php

Ubahsuai :

Nagios Core

Fedora Quickstart

---

Up To: Contents
See Also: Quickstart Installation Guides, Security Considerations

Introduction

This guide is intended to provide you with simple instructions on how to install Nagios from source (code) on Fedora and have it monitoring your local machine inside of 20 minutes. No advanced installation options are discussed here - just the basics that will work for 95% of users who want to get started.

These instructions were written based on a standard Fedora Core 6 Linux distribution.

What You'll End Up With

If you follow these instructions, here's what you'll end up with:

• Nagios and the plugins will be installed underneath /usr/local/nagios
• Nagios will be configured to monitor a few aspects of your local system (CPU load, disk usage, etc.)
• The Nagios web interface will be accessible at http://localhost/nagios/

Prerequisites

During portions of the installation you'll need to have root access to your machine.

Make sure you've installed the following packages on your Fedora installation before continuing.

• Apache
• PHP
• GCC compiler
• GD development libraries

You can use yum to install these packages by running the following commands (as root):

yum install httpd php  yum install gcc glibc glibc-common  yum install gd gd-devel  

1) Create Account Information

Become the root user.

su -l  

Create a new nagios user account and give it a password.

/usr/sbin/useradd -m nagios  passwd nagios  

Create a new nagcmd group for allowing external commands to be submitted through the web interface. Add both the nagios user and the apache user to the group.

/usr/sbin/groupadd nagcmd  /usr/sbin/usermod -a -G nagcmd nagios  /usr/sbin/usermod -a -G nagcmd apache  

2) Download Nagios and the Plugins

Create a directory for storing the downloads.

mkdir ~/downloads  cd ~/downloads  

Download the source code tarballs of both Nagios and the Nagios plugins (visit http://www.nagios.org/download/ for links to the latest versions). These directions were tested with Nagios 3.1.1 and Nagios Plugins 1.4.11.

wget http://prdownloads.sourceforge.net/sourceforge/nagios/nagios-3.2.1.tar.gz  wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.11.tar.gz  

3) Compile and Install Nagios (Pastikan File yang terkini dan Folder yang telah extract)

Extract the Nagios source code tarball.

cd ~/downloads  tar xzf nagios-3.2.1.tar.gz         <- Lebih Perhatian ---<  cd nagios-3.2.1                      

Run the Nagios configure script, passing the name of the group you created earlier like so:

./configure --with-command-group=nagcmd  

Compile the Nagios source code.

make all  

Install binaries, init script, sample config files and set permissions on the external command directory.

make install  make install-init  make install-config  make install-commandmode  

Don't start Nagios yet - there's still more that needs to be done...

4) Customize Configuration

Sample configuration files have now been installed in the /usr/local/nagios/etc directory. These sample files should work fine for getting started with Nagios. You'll need to make just one change before you proceed...

Edit the /usr/local/nagios/etc/objects/contacts.cfg config file with your favorite editor and change the email address associated with the nagiosadmin contact definition to the address you'd like to use for receiving alerts.

nano /usr/local/nagios/etc/objects/contacts.cfg  

5) Configure the Web Interface

Install the Nagios web config file in the Apache conf.d directory.

make install-webconf  

Create a nagiosadmin account for logging into the Nagios web interface. Remember the password you assign to this account - you'll need it later.

htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin  

Restart Apache to make the new settings take effect.

service httpd restart  

Note: Consider implementing the ehanced CGI security measures described here to ensure that your web authentication credentials are not compromised.

6) Compile and Install the Nagios Plugins

Extract the Nagios plugins source code tarball.

cd ~/downloads  tar xzf nagios-plugins-1.4.11.tar.gz  cd nagios-plugins-1.4.11  

Compile and install the plugins.

./configure --with-nagios-user=nagios --with-nagios-group=nagios  make  make install  

7) Start Nagios

Add Nagios to the list of system services and have it automatically start when the system boots.

chkconfig --add nagios  chkconfig nagios on  

Verify the sample Nagios configuration files.

/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg  

If there are no errors, start Nagios.

service nagios start  

8) Modify SELinux Settings

Fedora ships with SELinux (Security Enhanced Linux) installed and in Enforcing mode by default. This can result in "Internal Server Error" messages when you attempt to access the Nagios CGIs.

See if SELinux is in Enforcing mode.

getenforce  

Put SELinux into Permissive mode.

setenforce 0  

To make this change permanent, you'll have to modify the settings in /etc/selinux/config and reboot.

Instead of disabling SELinux or setting it to permissive mode, you can use the following command to run the CGIs under SELinux enforcing/targeted mode:

chcon -R -t httpd_sys_content_t /usr/local/nagios/sbin/       (Tak Perlu Buat)  chcon -R -t httpd_sys_content_t /usr/local/nagios/share/      (Tak Perlu Buat)  

For information on running the Nagios CGIs under Enforcing mode with a targeted policy, visit the Nagios Support Portal or Nagios Community Wiki.

9) Login to the Web Interface

You should now be able to access the Nagios web interface at the URL below. You'll be prompted for the username (nagiosadmin) and password you specified earlier.

http://localhost/nagios/  

Click on the "Service Detail" navbar link to see details of what's being monitored on your local machine. It will take a few minutes for Nagios to check all the services associated with your machine, as the checks are spread out over time.

10) Other Modifications

Make sure your machine's firewall rules are configured to allow access to the web server if you want to access the Nagios interface remotely.

Configuring email notifications is out of the scope of this documentation. While Nagios is currently configured to send you email notifications, your system may not yet have a mail program properly installed or configured. Refer to your system documentation, search the web, or look to the Nagios Support Portal or Nagios Community Wiki for specific instructions on configuring your system to send email messages to external addresses. More information on notifications can be found here.

11) You're Done

Congratulations! You sucessfully installed Nagios. Your journey into monitoring is just beginning. You'll no doubt want to monitor more than just your local machine, so check out the following docs...

• Monitoring Windows machines
• Monitoring Linux/Unix machines
• Monitoring Netware servers
• Monitoring routers/switches
• Monitoring publicly available services (HTTP, FTP, SSH, etc.)

---

Tukar Streamyx Account Password

https://tmbill.tm.net.my/

Masukkan User Streamyx tanpa @streamyx : Contoh my9w2zch@streamyx. Gunakan my9w2zch sahaja untuk user name.

Password asal streamyx account.

Tukarlah password anda kepada password yang anda inginkan.

User tidak boleh ditukarkan.

langsat8